Question

How to add RF-2WT10-SS to evo-gm3 with RFACompu.

if this don't work what do ineed to make it work?

2014 GMC sierra with key..

Answer 1

You do use the RFA compu you need the FT-D100. RFA COMPU is only used with evo-one NOT evo-all.

Also we have not tested this RF kit as it is not listed on our compatible RF kit section, is this a new series with the encoder built into the antenna.  (http://fortin.ca/en/technology/rf_kits.html)

If you did want to try it you would follow this guide: http://cdn.fortin.ca/download/20141/rf-2w1b-sp-install-guide-20141.pdf

Comments

so i need the FT-D100 and not the RFA compu Right

---

ft-d100 is for evo-all

rfa compu is for evo-one

 

As previously mentioned this RF kit has not been tested with the evo and is not listed in the supported RF kit section. You can try it but I do not know if the buttom mapping is the same.

---

it made by arctic start

---

Ah I see it now yes. It is listed...FYI artic start and compustar are one and the same ;) still need an FT-D100 though.

---

I will order the FT-D100 and let you know how it works out..

 

Thank you Derek

---

 sounds good 

---

HI

i got the FT-D100 and wihch wire do i plug from the eve-gm3 in to the FT-D100 in the sucket with plugs side byside with 2 pin and 4 pin or 4 pin and 6 pin

Thanks