Trying to add RF kit RK441 to EVO ALL 2015 Infiniti Q50

Question

Trying to add RF kit  RFK441 to my remote start using EVO ALL and T harness.  I flashed it and the remote start is working great using OEM remote. I have the option selected for RF Kit -Fortin 2.  I setup EVO ALL to receive the RF kit programming and the red, yellow and blue stay solid during the process and dont flash after pressing the program button listed on instructions. The antenna blink once when I press buttons to program it, but the car doesnt respond to key presses on the RF remote. Any suggestions?      2015 Infiniti Q50, push button start.

Answer 1

Hello,

Sounds like you might not be following the progamming correctly.

- unplug the black 4 pin connector.

- hold down the programming button, insert the black 4 pin and release it when both red and blue leds are on.

- press and hold the programming button again and continue to hold it down, blue and red will be go out then come back on, when they come back on release the programming button.

- turn the ignition to the on posiition, at this point all 3 leds should be lit on the evo and the led antenna should be flashing rapidly.

- on the remote press the (+) button followed by pressing the lock button.

- once all remotes are programmed turn the ignition off and test.

https://fortin.ca/download/69991/EVO-ALL_QG_FMH-SERIE_C_69991.pdf

Best regards.