I need to know options programming Evo One for my car.

Question

I have Toyota Sienna 2014 Push-to-start and I need to know options I have to program with FLU.

Answer 1

Just D6 on the bypass side, as well as firmware 79.25 or higher.

Answer 2

If doing 3x lock enable option C1 and 38.2

Comments

It will be good if you send me all programming functions. Thanks.

---

If doing 3x lock enable option C1 and 38.2.

Push-to-start also enable option D6.

---

I did how you said but no way. Remote start doesn't work.

---

What does the module/vehicle do when you try to remote start the vehicle?

---

Hi Derek. When I push lock button I see blue light on the module but after that do nothing. No ignition, no attempt to start. I programmed module according your recomendation but .....I checked all wires and connectors and I guess that module doesnt work.

---

did you cut the yellow wire on the back of the evo-oone?

does the red led turn on?

if the vehicle does not remote start, the parking lights will flash X amount times (if they are connected) to help diagnos where the issue is. How many times they flash?

does ignition turn on but the car does not crank?

---

Yes I cut yellow wire because it automatically transmission. But  is not blinking red or orange led. And not flash parking lights. I have an experience to insall Fortin but I see such problem first time. I want  to change module. Thank you for help.