Evo-all will not bypass transponder with "2 key" method

Question

Installed a Solace remote start with an Evo-All into a 2014 Mazda CX9 and could not get past the transponder bypass part of the "2 key" programming. I tried different levels of firmware, different module, and even a EVOKEY but could not get it, usually on Fords the 2 keys programming seems to go pretty smooth. I did get it to finally program through the "one key" programming method using the decryptor. Any idea why this could happen? Thanks, Mike.

Answer 1

If you are having trouble with the 2 key programming it can come down to a couple of things:

1- Timing is wrong.

2- BCM is locked by the dealer against spare key programming

3- The BCM has no empty slots left to accept a spare key.

4- You do not have 2 master keys: often times you will have 2 keys but the second key is a clone of the first key.

 

DCryptor is a great solution to when these problems are present.