Cadenza problem by video

Question

Hi , this is my 2015 kia cadenza problem by video.  The OEM remote and fortin FTX44 2W can do everything except remote starting .

When you push the start button sometimes it do nothing and sometimes it just unlock then lock the car doors .

Any way these are three short videos will explain everything to you .

Thank for helping me

1......  https://youtu.be/PP6Nyi-71r0

2......  https://youtu.be/ZsIkDDXFBGE

And this one for main 6 pin harness test

3......   https://youtu.be/Y2paFl_Ox1A

Answer 1

Nice videos!

It's flashing the lights 3 times when you try to start it. 3 flashes = ready mode not set. 

 

Since you have an automatic vehicle, that yellow wire loop needs to be cut. If the yellow wire is already cut, try cycling power to the unit by just disconnecting the main power harness.

 

A full reset on the remote starter side options may also help. After the reset, you will need to redo any options you had in the remote starter settings and also reprogram the remotes. To do this,follow these steps:

1- Press unlock on the fortin remote

2- turn on ignition

3- press and hold valet button until led starts to flash

4- press valet button 23 times

5- press and release the brake

6- press and hold the valet button for 5 seconds (led will flash off-on)

Comments

Thanks alot Mr. Robert T. 

---

Hi Robert.

Could you help me in speed-sensative central locking . It is no longer working after evo one . Always  unlocked until you lock it manually.

---

Most likely need to re-enable the feature in the vehicle user settings (vehicle owners manual should show how to enable or disable the autolocking feature).

You can also have the EVO-ONE do it instead by enabling option 7.2. This would lock the doors when ignition is on and brake is pressed, and also unlock the doors when ignition turns off.

 

Did you notice if it doesnt work only after the vehicle has been remote started? If you start the car with the key and not the rmeote starter and then drive away, do the doors then relock?

---

I enabled 7.2..... Still NO automatic lock. Neither if the vehicle remote started nor by normal started. 

But the car is automatically unlocked after turning off.

---

Keep it simple.

Disconnect the EVO, start the vehicle and drive away and check to see if the car locks when driving away.