Any solutions for 2015 Nissan Frontier manual trans?

Question

Any available options for 2015 frontier manual transmission? Thanks

Answer 1

The solutions would be to install a MANUAL TRANSMISSION capable remote starter.

 

You will need to do CLUTCH SWITCH BYPASS to be able to start a manual transmission vehicle.

 

The Evo All will do immobilizer bypass and convenience features on the  2015 Nissan Frontier

 

It will be the remote starter that will take care of starting the vehicle and monitoring handbrake, door status, and tachometer voltage.

Comments

Any reason I cannot use the evo one with t harness with a relay wired in for the clutch switch ? Looks like I could.

---

You can use the Evo One with the T-harness, but you will have to program some options using our Flashlink-2 updater for it to function properly

 

IN THE REMOTE STARTER SIDE:

 

Function 2 to MODE 3 (enables 2nd starter output)

 

DO NOT TURN ON  Function 32 to MODE 3 and also DO NOT connect  the DARK BLUE  from the 20 pin connector to the Driver's door pin, ( this will disable the manual transmission ready mode if connected)

 

Verify that Function 20 is on MODE 4 (Tach Data-Link only)

 

You can also try Function 33 to MODE 2, once you have everything working properly, you can try this opton if you want the vehicle to go into READY mode by just by setting the HANDBRAKE while pressing on the BRAKE pedal

 

FOLLOW THE REST OF THE GUIDE (17743)  FOR THE REMAINING CONNECTIONS AND PROGRAMMING

PLUS, THE CLUTCH SWITCH NEEDS TO BE BYPASSED PROPERLY WITH A RELAY.