Rf411 not responding

Question

I installed an evo one and rf411 in a honda civic 2012 and it worked perfectly while i was installing it. However, while routing the antenna, I removed the cable from the antenna side to make the routing easier and re attached it after. Now the factory remote 3x start works but the rf kit remote is not accepted by the antenna. Also there is no lights coming on the antenna. I tried plugging it in to see if the light comes on, reprogrammed the evo one, tried the antenna button, tried putting the antenna in programming mode but the led doesnt come on at all.

Answer 1

Sounds like you may have broken the antenna cable when you routed it. Metering it would tell you if that is the case.

Comments

I tested that by plugging it into my jeep which has an evo all, the led did come on and i was able to get it into programming mode. Do you think reflashing the evo one in the civic would help? Also are fortin rf kits reprogrammable?

---

when you tested the cable did you also test the antenna as well? both worked on the other vehicle?

 

You can try re flashing the remote starter, see if that changes anything.

Answer 2

EVO-ONE does allow RF programming if it is in an armed state. It must disarmed first.
Press unlock on your oem to disarm the EVO-ONE then do your RF programming.