Which circuits on the evo one are used to interrupt the brown clutch switch

Question

fed the brown wire at the white clutch switch 12v so I'm good there

now I must interrupt the grey wire at the brown clutch switch for cranking and need to know which circuits on the EVO ONE are used to achieve this

2011 Nissan Juke Push to Start, Manual Trans

Answer 1

Two choices,

1- wire your own relay

2- modify the tharness (if using a tharness) to use the evo white/red and white/green that would normally be used to press the brake on an automatic vehicle. It is not timed the same as the starter wire so may cause no starts. see page 5 as an example https://fortin.ca/download/74301/evo-one_ig_thr_bi_nis1-sentra_pts_2013-2018_a_74301.pdf