2020 Silverado Linkr LT2 door locks not working

Question

I installed the Fortin Evo-all with T-Harness on my 2020 Silverado 2500HD that has no Onstar, then added the Linkr LT2 and everything works except the door locks. I checked continuity of the purple and purple/white wires from the Evo-All plug to the pins on the BCM and the wires are fine. With the Evo-All disconnected I can control the door locks by applying ground to the purple and purple/white wires. I have performed a full reset of the Evo-All multiple times, and tried at least 20 different flash configurations and nothing. It seems as if the Evo-All is not applying ground for lock control, possible firware or module issue because the Evo-All is Flashing the Blue light for lock via the Linkr LT2 and the red and blue for unlock. Any feedback would be greatly appreciated.

Answer 1

Re do the programming ensuring you do step 10: https://fortin.ca/download/91061/evo-all_ig_tsa_bi_gm7-sierra1500-sylverado1500_2019_a_91061.pdf

 

Also make sure you have the correct door lock connector plugged into the evo.

Comments

I am sure that I have been doing that, but tried again and cant finish because I have reached my dcryptor limit. My EVo-All is SN 001A07157045, can it be reset?