2013 NISSAN ALTIMA PUSH TO START NOT STARTING

Question

I HAVE A 2013 NISSAN ALTIMA 4 DOOR SEDAN. I INSTALLED THIS WITH A T-HARNESS BUT IT KEPT GIVING ME PROBLEMS. THE PROBLEMS WAS THE CAR WOULD NOT START OR SHUT DOWN WITHOUT REMOTE STARTING THE CAR. SO I HARD WIRED IT AND NOW THE IGNITION COMES ON AND NO START.

SERVICE NUMBER 001A06677653

Answer 1

Enable option D6.

Here are some connections to look at for on non-tharness installs that ignition turns on but no crank.

These 2 control the starter relay at the IPDM under the hood:

• (-) Ignition3
• (-) Starter

 

I would suggest putting your blower to max so taht you can hear it turn on. If it does not, the (+) ignition and (+) will need to be checked. 

 

The problem you were having initially, car wouldn't start or stop unless remote started, is normally due to un seated connector. 

Comments

Thanks for the information I really appreciate it. What does the option D6 for?

---

D6 Tells the unit car is push-to-start.