Questions & Answers

2012 Ford Explorer PTS

0 votes
installed evoall stand alone with solace RF kit remote start works fine door locks wont work i tried grounding the purple wire on the evo all and still dont work the blue light on the evo all flashes when the remote is pressed but wont unlock  the factory remotes work to lock and unlock the doors when remote started and the evo all blue light  flashes when the oem remote is used guide 88721 software is .57 evoall service number is 001A06814763
posté Nov 2, 2019 dans la catégorie Ford par trevor gorniak (2,230 points)
modifié Nov 3, 2019 par trevor gorniak

1 Réponse

0 votes
 
Meilleure réponse
the 0.57 should of only been recommended for the Taurus.

 

Reprogram the unit with 71.28.
répondu Nov 4, 2019 par Robert T2 (299,010 points)
élue Nov 18, 2019 par Robert T2
the guide say .57 only

can you please ensure the decrytor was reset to zero as i only have once left and the flash reset. this unit was a real issue followed guide  and even went as far as to rewire unit and double checked all connections.

is there any way to get the guides corrected as this has been two guides in a week that have been incorrect,

thanks Robb

Guide says 71.28. The flash link though was pushing 0.57 on those installs. I forced changed it. 

 

I'll get the dcryptor checked. Try without reprogramming though, there's a chance you may not need to reprogram since it's a "release on yellow" type programming.  Just make sure everything works (lock- unlock, start, stop with remote, stop with brake)

 

https://cdn02.fortin.ca/download/88721/evo-all_ig_sal_bi_for-edge-mkx-explorer_pts_2013_a_88721.pdf

 

Also, you shouldnt need D2 on these cars. Factory alarm or not. 

hey robb

it depends what browser you are using if you use microsof edge or safari in comes up with software 57 in the guide if you use microsoft Edge the same guide tells you to use 71.28

same guide 88721 but microsoft edge pulls a later revision
That's a browser cache issue. It keeps showing you what you once downloaded before.

Hit CTRL+F5 or hit CTRL-SHIFT-DELETE to clear the cache (choose clear chached images and files).
Hey Robb

Customer came back i reset the software and reprogramed the evo all and all works like it should

thanks for the support

Trevor
...