Car shuts off when I press the brake PLEASE HELP

Question

Installed the unit, was simple however for some reason after I start the car with the remote, I unlock with the remote, press the brake to put it into gear and it shuts off, I have to then restart the car. Im not trying to kill the starter, anyone have any advise?

Answer 1

Hey, I'm having the same issue with my Honda. Did you ever find a solution?

Answer 2

Can you provide any details of the remote start make/model, what bypass model, what installation you are doing, and what make and model the car is?

Answer 3

Door must be closed when remote starting, press unlock, open door, close door, press brake.

Answer 4

Does your car have push to start? For my install to takeover all I have to do is push the start button then press the brake and put it in gear. If I push the brake only without pushing the start button the engine will shut off. So try and push the button first. Hope this helps!

Comments

Try locking doors ( all doors must be closed). Then auto start with the 3x lock. Once car is on unlock with remote or button. After that the car will know it’s u and not someone else. Works for me every time. Hope this helps.

---

I have a 2016 Honda CRV with Push Start and Evo One Remote Starter. Not sure if the first part is needed but what I did 1st was connect the Evo One to my computer using the Fortin Flash-Link4. Went into Pro settings and turn off Push Start and reinstall in the car, it still shut off when I hit the brake.

2nd I remote started the car, got in and Pushed the Start button 2 times and then did a short quick tap on the brake. This worked Car stayed on. Only problem is a smart key light comes on in the dash, not a big deal for me.