Remote Start does not turn on in 2017 GMC Terrain

Question

Problem: Does not remote start. Blinks blue once after hitting lock and 3x lock. Hold down lock and blinks twice. Blinks/flashes blue twice after unlock.

Connectors:1 ignition connection, 2 Key bypass immo connector, 3 OBDll Dk. Green to brown can sw C5, 4 At Parking Light  switch Lt. Blue to brown white A14

C1 Enabled D1 Enabled D2 Enabled A11 Disabled A14 Disabled

29081 Stand alone EVO-All GM FLIP KEY

Service No:	001A06 783034
Preload date:	48-2017
Hardware version:	6
Firmware version:	70.31
Recommended version:	70.32
Vehicle:	GMC TERRAIN 2017 - STANDARD-KEY
DCryptor:	DCRYPTOR HAS FINISHED PROCESSING THE DATA. THE MODULE HAS BEEN UPDATED AND IT IS READY FOR USE.

 

Answer 1

Your module is not set for 3x lock operation, enable otion D1.10 and try again !

Comments

Thank you so much, This fixed the problem.

I noticed that the only way to turn off the remote start is to press on the brake.

Is there another way to turn off the remote start with the key fob?

I used the key to unlock the car since pressing the button would't do anything.

---

On this vehicle, the factory remote stops working when the engine is running. This is normal.

For improved functionality you should add an RF kit.