Adding an RF kit after installation

Question

I have an EVO-ONE.

 

It has been installed for over a year now and is working fine with my OEM remote/smart key.

 

The vehicle is a 2015 Hyundai Sonata LTD, 2.4, Automatic, Push-To-Start. (Install Guide 17203)

 

 

 

 

I now wish to add the RF642W 2-way remote to my system to increase the range.

 

I'm reading through the installation guide for the RF642W. (Install Guide 33021)

 

I see no mention anywhere of changing any settings via the flashlink updater..

 

 

Is the flashlink updater absolutely necessary to add the RF262W,

 

or can I just follow the installation guide, plug in the antenna, and program the 2 new remotes?

 

 

 

I'm a little confused, as somewhere I saw that the unit MUST be set up all over again with a certain option for a RF kit.

 

If that is the case, exactly what option do I select?

 

I see very little info on this, and if so, it should be docummented within the Install Guide for the 2-way remotes.

 

Thanks

Answer 1

The EVOONE is preset for Fortin RFKIT. Connect the antenna in the blue port and program remotes according to guide.