Questions & Answers

2017 Tundra Cranks only

0 votes

Car: 2017 Toyota Tundra G Key

Using the T harness.

Module Serial: 002B169870

 

I can not manage to get the car started, all it does it cranks.  I have quadruple checked the wires and did a re-installation twice.

Firmwire is all flashed to the lastest version using the flashlink.

My troubleshoot:

I disconnected the TPMS/Sil Data plugs, tried starting the car, still cranks only.

Disconnected the light blue/black wire, tried remote start, still cranks, put the key next to the barrel, still only cranks as well.

I checked to see if there was an issue with the ignition wire, yellow wire is connected to the pink T harness and everything looks good there.

Still cranking.

 

Flashlink:

What I have on:

2.4

4.1

6.1

7.1

8.1

9.1

9.6

10.1

11.1

12.1

13.2

14.2

15.1

16.5

18.1

19.1

20.6

24.1

26.1

29.1

30.1

31.1

32.1

33.1

34.1

35.1

36.3

37.1

38.2

39.1

 

 

 

 

 

On the module, when I lock and unlock, I do indeed get a blue led light.

 

At this point, I am thinking the module is not syncing with my key, is this a module default or could it be that the T harness is defect or improperly pinned as I've heard stories of them being pinned incorrectly.

 

Thanks.

 

 

 

 

posté Sept 7, 2017 dans la catégorie Toyota par Chee Her (130 points)
modifié Sept 7, 2017 par Chee Her

2 Réponses

0 votes
You have somehow flashed starter firmware into the bypass. (as seen here http://fortin.ca/en/support/002b02169870/)

I suggest re flashing the module with 79.42, performing a master reset, then re programming the module in the vehicle and re test.

Master reset procedure can be found here: http://wirecolor.com/en/qa/50193/faq-how-do-i-reset-my-evo-all?show=50193#q50193
répondu Sept 7, 2017 par derek g (334,350 points)
0 votes
What is the part number written on the t-harness sticker ?
répondu Sept 9, 2017 par Mathieu Bertrand Collin (62,040 points)
...