Do I connect CAN LOW and HIGH wires (EVO-ALL) on a 2009 Ford F150

Question

The install guide #34451 for a 2009 Ford F150 calls for items 2 and 5 to be hooked up. What about 1 (ignition), 3  or 6 (BCM), 4 (OBD CAN LOW & HIGH)?

Answer 1

All wiring should be done according to page 4 of the guide you referenced. The ignition, accessory, start, 12 volts, CAN high/low, and RX/TX are mandatory. The parking lights are not required for remote start. The driver door pin connection is require for RAP control and to arm the factory alarm.