Questions & Answers

2008 Infiniti EX35, no crank

+1 vote
Im using an EVO-ALL with remote start. The unit powers up, but the push button only advances to ACC, almost like the white/black wire isn't triggering it to the IGN position. This makes it a little more wierd, If I hold the brake during remote start it WILL start but then dies after 5 seconds. Yes, I have checked that I am on the correct 12volt and Brake wire, and metered the brake wire during crank and it is being powered up similar to ignition or +GWR. I have checked through all my other connections all ready. Any input would be appreciated.
posté Dec 20, 2013 dans la catégorie Infiniti par Adam Mckay (430 points)

1 Réponse

+1 vote
 
Meilleure réponse
I figured it out. I was using the lt.blue brake wire contrary to the install guide which lists white. The lt.blue wire is in the correct pin location on the brake switch and the white wire is in the pin location listed for the G37/Maxima.
répondu Dec 20, 2013 par Adam Mckay (430 points)
élue Jan 15, 2014 par Robert T2
Hey i am currently having the same issue, i didnt try it with the foot on brake pedal though. Can you further explain the white, blue cable locations?
commenté Dec 31, 2020 par andre cordeiro (100 points)

Questions associées:

...