Questions & Answers

Can't get parking lights to work

0 votes
I have a 2012 Ford escape using a EVO All with Tharness 3button remote start is working but cannot get the parking lights to work.  I have tapped the wire and put power to it and all of the parking light come on just can't get the evo all to light them.

 

Do i need to program the evo all?
posté Jan 24, 2015 dans la catégorie Ford par William Fargo (250 points)

1 Réponse

0 votes
Need to connect positive parking light output from your remote starter to the vehicle parking light wire.

What remote start brand are you using ?
répondu Jan 24, 2015 par William Fargo (85,210 points)
Is the soltuion buy a new module?  Can you buy just the module?  What is the process?

 

Thanks
The EVO-ALL can be bought separately.

Where did you connect the main power for the relay that powers the parking lights? I don't want you ordering a unit to re-install it and end up with a blown output again.
The relay was connected to a 12v positive always on connection.
The relay was connected as follows pins 86 and 87 were connected to the positive battery cable with pin 85 being the brown and white from the EVO and pin 30 went to the parking lights.

Are EVO Alls the same and programmed for the vehicle with the flash link?
I am having the same issue with a 2007 Jeep Wrangler.
...