2007 Lexus GS450h EVO ONE with INT-SL+ OEM Key doesn't work

Question

I have EVO ONE Bypass firmware 0.20, Remote Start firmware 1.26 + INT-SL+ with 0.17 firmware. After programming my OEM remote it accepts it and I can see that on INT-SL+ module red LED flashs when I lock/unlock doors with my OEM remote conrtol, byt while car is remote started it is no action, I can use only my app to unlock doors. What can be the issue? what settings I need to enable on EVO ONE for my car and this set up to get it done?

Answer 1

Hello,

 

It is normal that your oem remote does not work when remote started.

The int-sl+ is for door lock control through a atfer market device like the app, not for door lock control from oem remote.

 

Best regards.

Comments

Thank you!

 

I have one more qoestion. Does INT-SL+ effects somehow on key take-over?

After remote start i can unlock doors, open driver door(car still running), byt when i press brake car shuts down.

I have 37.2 enabled, and it's working. When I just open door without unlocking it car shuts down.

Mostly Bypass and Remote Start is set on recomendet settings, I know it's hard to walk through each setting by Q&A chat, but maybe you can give me some hints or common features of EVO ONE what I can check.

---

You could try hardwiring the door pin to the evo one, perhaps the evo needs door status for take over to work properly.

---

My door pin hardwired to EVO with pink/black wire, thats how 37.2 option knows if the door is oppened and shuts down the car if it's not unlocked by remote controle. If I unlock door with remote control, open door, then press brake car shuts down like in the door was openned scenario without unlocking by remote control.