2013 Touareg no crank 3x lock Thar-AUD1/Evo all

Question

2013 Touareg 3.0 TDI, unit programs fine however when 3x lock the vehicle dash lights up but no crank. I triple checked PIN2 of the BCM connector for the brake lights as directly across in PIN18 is the same color wire, also with a test light at the module it lights up with ign on and pressing the brake pedal. I assume its an option in the module that needs changing.

 

Module S/N is 001A07217040

 

Thanks

Answer 1

Update, I got the car back, turned off D2 and unit functions as it should now.

 

Thanks for your help!

Answer 2

Start by turning OFF option D2 in your unit. Disarm before start will cause a no start on these vehicles.

 

If that still does not fix it, verify the brake connection. And leave D2 OFF

Answer 3

I can confirm this is the answer to your issues as I just had the same experience a few days ago with my 2014.

I also had an issue with the defaut setting "lock after start" or something like that (I apologize I cannot obviously check the settings now with the unit in the vehicle) where it would do exactly that but the mirrors would also fold themselves in but not go back on unlock(??)

Comments

On most vehicles with power mirrors, once the car is running, unlock from the oem remote cannot control the mirrors anymore. Only the button inside the car can.