2015 Forester (push to start) , shut down immidiately after remote started.

1 Answer

Hello,

Normally that will happen when you have the lt.bue/black wire on the wrong side of the cut. Page 3 https://cdn02.fortin.ca/download/95441/EVO-ONE_IG_REG_BI_SUB_FORESTER_2015_PTS_A_95441.pdf

Best regards.

answered Sep 23 by derek g (347,180 points)

Thanks for the reply.

Very confusing in D1/A10 (cut D3), When to connect and when to cut? and where is the "wire on the wrong side of the cut"?

Appreciate your reply in advance.

commented Sep 23 by darwin dioneda (270 points)

You are cutting the vehicles IMO wire.

Once it is cut, you are left with 2 ends; referred to as "connector side" and "car side"

D1/A10 will go on "connector side"

D3 will go on "car side"

commented Sep 23 by Robert T (301,890 points)

Thank you very much!

commented Sep 23 by darwin dioneda (270 points)