2017 toyota LC200 Repetition of the question.

Question

I installed an Evo-All and a remote start alarm on a Toyota LC 200 (2017). Remote start sets the car to factory alarm and if I open the door with the alarm installed, the factory alarm goes off.                                                          The doors are closed with a purple wire and it will arm, but when I open it with a purple-white wire, the standard(factory) alarm goes off (an alarm is triggered).        evo-all 001A07312787

Answer 1

Hello,

 

If that is the case I would suggest locating the dis arm wire for the vehicles factory alarm and connecting your remote starters dis arm wire to it.

 

Best regards.

Comments

Yes, I searched but didn't find it. The key (in the door) also does not turn off the alarm. It only turns off from the stock key fob. I chose this option - With the alarm, the doors close and when we turn off the alarm, the doors do not open, but when the owner touches the door handle, the doors also open and the standard alarm also turns off.

---

That would mean you would need to enable dis arm through key lock in the vehicles bcm. Once that is done the wire from the key cylinder will dis arm the oem alarm and you could then connect to it.