Will Guide # 84961 work for a 2003 Camry that does not have immobilizer from the factory

Question

I have 2003 Camry that I followed Guide # 84961. I could not find the immobilizer to connect A10/20 to. These are for the anti-theft immobilizer which this car does not have. I left them out and did not do the bypass programming as I didn't think it needed it since the car didn't have an immoblizer. I programmed in a RF642w RF kit. I was able to remote start the car fine and lock/unlock worked fine. Everything was working until I hit the Aux(4th button down). That seemed to make the Evo-One unresponsive and now the remotes dont seem to work. I unplugged the evo one and plugged back in but nothing lights up. What is concerning is the car no longer starts with the key. All lights come on but no crank. Evo-One is not fried as it is still responsive when I plug it into the flashlink updater. Could it be the relays? Are there recommended relays for this guide or will any 12 volt relay work?

Answer 1

Sounds like you may have wired you trunk relay wrong and damaged the unit.

 

If you check the starter output of the evo-one (yellow wire on 6 pin) when sending start command from 642 does it do anything?