2020 Escalade fails dcryptor

Question

I moved my remote start (Viper 4706V) and EVO-ALL from a 2017 Cadillac Escalade to a 2020 Cadilliac Escalade.  I am using the THAR-GM6 T-Harness with standard installation and put in the latest firmware into the EVO-ALL.  I can get the module to program and get the slow blue flash, but when I try to dcrypt the key, it fails and tells me invalid key.  I dont believe anything has changed from 2017 to 2020 on the Escalade, but I could be wrong.  What am I missing?

Answer 1

We currently do not list the 2020. It has not been tested and is currently not supported.

 

A few things you can still try:

 

- A master reset in the vehicle: https://fortin.ca/en/download/61931/61931.pdf

- Try updating the firmware in the module to 70.40 and then re program it in the vehicle and try re sending dcryptor.

Comments

Thank You.  I will try the firmware update.  I did already try the master reset.  I guess I assumed all would be the same with the 2020.  Its the same body style as the 2017 so I didnt think things would change.  I am sure if I wait patiently, it will be supported at some point in the future.

---

Yes, if anything it would be an encryptrion change and wouldnt require much re working.

 

It will be supported in the future for sure but I do not have any type of eta.

---

Has there been any progress on the 2020 Cadillac Escalade?  I would have figured there would be a solution by now.