Why don’t my tail and dash lights work?

Question

I self installed eco-all with T-harness using posi-tap and splice connectors. I followed the wiring diagram and checked fuses so it must be a wiring issue. I double checked the splices and taps for the lighting wire according to the diagram and it appeared to be good? (2013 Impreza key start)

Answer 1

Blame the t-taps if PINK on the EVO is to the proper wire on the car.

 

You can also connect it right at the switch.

http://www.wirecolor.com/vehiclegroupimage/78221.jpg

http://www.wirecolor.com/vehiclegroupimage/78041.jpg

Comments

Thank you for the response.

So just untap the EVO pink wire?

---

taps are cute until they decide to not play nice

---

Sorry. Misunderstood your response. The pink is tapped into the blk/blue line from the car. Was hoping there was an error in the wiring diagram from Fortin - ie needed to tap into a different wire.

---

Ahh. I’m following now. I’ll try to twist connect to ensure solid connection. Thanks again for the help!