Will EVO-ALL with FORT1 work in my 2014 Ford F-150 FX4?

Question

I have the EVO-ALL with FORT1 har. I also have the flash link updater. Will this unit start my vehicle by itself? Do I need anything else? I had an evo all in my old truck and used an external remote starter and only had one key and everything worked. Do I need two keys with my 2014 f150?

Answer 1

2 master keys required for all Fords with an 80 bit key. Programming replicates the factory procedure to program a key to the car, which requires 2 master keys. https://cdn02.fortin.ca/download/34421/evo-all_ig_tsa_bi_for1-80bits_c_34421.pdf

Comments

Ok. I'm guessing where I am confused is the 40bit vs 80bit? on my 2007 we used 1 key and the decryptor and everything worked fine. Is this not possible with the 80bit? Also, if I have a key made and programmed will that work or can you only get a master key from the dealership?

---

No dcryptor on 80bit keys.

 

Some locksmiths can program actual master keys.

A cloned key would not work since in theory that would be Key1 and Key1.