please help me in evo one

Question

hello

i have evo one in my kia rio 2013

work with excalibur rf51 edp kit

from 4days somthing went wrong and not working

how can i reset defaults in evo one

i dont have the programmer tool

thanks

Answer 1

If you reset the module and do not have access to the flash link you will not be able to re enable the options in the bypass...What is the issue you are experiencing?

Comments

the rf kit not working

i setup the evo one again till the blue led

but i cant setup the rf kit

---

what can i do

please help me

---

Service No: 002B07210205

---

Was the RF kit working before? Or has it never worked?

---

Yes sir working perfectly before My kids push the brake and play with car key After that didn't work I don't know what happened Please help

---

I think something happened in programming but the rf kit didn't accept like before

---

I think something changed in the programming of evo one so I need help... I don't know what to do

---

Is the red led on underneath the yellow loop?

---

you mean the red led under the yellow wire?

---

if you mean this one 

first yes it is on

after that i try to reprogram the evo one with the car and now this led red off

---

If the red led is on that means the module is in valet mode.

try the following to enter or exit valet mode:

- Ignition ON

- 3x on the valet switch

- ignition OFF

 

Also try to follow this link and re progrm the remote to the evo:

http://cdn.fortin.ca/download/25141/excalibur-rf-31-edp-install-guide-25141.pdf

---

how can i change the mode

i didnot understand this point

---

Oh yes that is correct you said you dont have a flash link updater.

Simply follow the programming procedure on the last page of the guide I linked above.

---

I did but nothing changed..I notice that before when I setup the evo one with my car and press the valet 5 times the car led light on with each valet... Now no car light like before...and I did all steps but nothing...please help me

---

WAIT FOR YOUR REPLY SIR

PLEASE HELP ME

---

If the red light is on solid again you have put it back into valet mode, like before to enter or exit valet mode you do the following:

- Ignition ON

- 3x on the valet switch

- ignition OFF

---

So I must make the valet mode off right? The red led must be off,

---

Yes light must be off.

---

I did all steps and the light off now.... I setup the evo one with the car till the blue led... I try to program it but nothing...no response... Press the valet till the led light flashing fast then press the valet 5 times for program the rf.... Nothing changed

---

Before when I program the evo one with the car when I press the valet the park light and anterior led light switch on one with each press...now no.... Why?

---

the park lights not flashing like before during programming the evo one with the rf kit

what is the problem

please help

---

the park lights not flashing like before during programming the evo one with the rf kit

what is the problem 

please help

---

Wait for your reply sir to help me please

---

Hello....I wait you answer sir