Question

I cannot enter valet mode for some reason. I push the start button twice to turn on the ignition, then I press and hold the valet switch, but nothing happens. What am I doing wrong? Thanks.

Answer 1

To enter valet mode you turn the ignition on and press the valet switch 3 times. same thing to exit valet mode.

Be sure you are using the valet switch and not the programming button.

This is for a Evo-One.

Comments

This still doesn't work. Could there be an option disabled in the software?

---

Option 36 and 30 are both for setting up how valet mode is set. I took the service number from your previous posts and the only thing i would change is option 36; set it back to option 36.1

 

If that does not work, either the unit is not seeing ignition (BIG PINK WIRE form 6-pin) or there's an issue with the valet button itself.