Questions & Answers

Can I activate EVO ONE via a pulse?.

+1 vote


Is there any way to activate EVO ONE remote start using a pulse trigger (not data link) like the activation wire in other remote starters?. The idea is for Telematic devices are not compatible with FORTIN's. 

 

asked Feb 10, 2016 in FAQ by Tager Tower (3,480 points)

1 Answer

+2 votes
 
Best answer

There is a function you can turn to to enable the evo-one to be triggered by a negative pulse, Function 38 mode 3 was a hidden test feature, you will need to access this option using the valet switch and remote controls.

Enabling this feature converts the middle pin of the shock sensor port to become an external trigger input to start. WARNING: please use a compatible shock sensor connector to avoid shorting out the middle pin of the shock sensor to the 12v pin that provides power to the shock sensor. Damaging the unit this way will void your warranty.

 

answered Feb 10, 2016 by J M (64,060 points)
selected Feb 10, 2016 by Tager Tower


That's good. Thank you sir.

Please tell me  how to enable 38.3 feature .

 

You will need to follow the programming guide that is in the installation guide that came with the Evo-One.

short version is:

1. Turn key to IGNITION position.

2. Press and hold valet switch until the red led ON THE SIDE of the unit flashes.

3. Press the valel button 38 times.

4. Press and release brake pedal, red led SHOULD FLASH ONCE.

5. Press the button on your remote control that is designated as button or mode 3

I am grateful sir.

 

...