07 F150.EVO-ALL. remote start starts vehicle but nothing works through the D2D

Question

I installed the evo-all hooked up so everything would work throught the D2D. I hooked the lock, unlock, brake and tach from the remote start to the evo-all but the functions do not work. in the manual for the CAN network wires are different in the truck compared to the manual. its pins 6 and 14 not 3 and 11. Is there something I missed or does the CAN hook up feature not supported on the f150?

Answer 1

so are you using 6 and 14 or 3 and 11?

follow the guide and use pins 3 and 11, thats the proper network for the module

Answer 2

6 and 14 is the ECM can

3 and 11 is the BCM can (Ford actually calls it a SJB)

If they are not present in 3 and 11 as i have seen this before on older ford vehicles, you will have to wire brake and locks manually to the vehicle from your remote starter.