Questions & Answers

Evo-All Chrt4 2012 Ram 1500 gas, Parking Light hookup

+2 votes
Is there any special way to hook up the 1K ohm resistor when hooking up the parking lights?  I'm assuming just install between existing parking light wire and evo module wire?  Also when hooking up 12v ignition wire are most people just tapping in at the fuse panel?  Thanks
asked Nov 30, 2015 in Ram by Travis Bailey (150 points)

3 Answers

+2 votes
Yes the 1K goes in series between the parking light output and the parking light wire in the vehicle.

The yellow ignition wire connect to the yellow wire coming out of the tharness. You don't have to connect to fuse panel.
answered Nov 30, 2015 by Travis Bailey (85,210 points)
0 votes
Where is this white wire to tap into at? At the light bulb?
answered Feb 16, 2016 by Richard Lovorn (180 points)
0 votes

The white wire you will connect the brown white with the 1k resistor is at the harness going into the light switch assembly.

Thank you.

answered Feb 16, 2016 by J M (64,060 points)
There is no white wire. Do you know which wire is for the running lights?
I got it my wires are different colors
...