evo-all with thar-gm1v2 Buick regal 2012 manual

Question

Im trying to install astand alone  evo all with the t harness in my buick 2012 manual transmission. What guide should I use is seen confusion when you go to the T harness, I can fond wehre to install the resistors and the diode. And when I follow the evo-all guide It does not say anything about the t harness.

Answer 1

Hi,

 

First, the stand alone feature is not for manual vehicles.

 

Taken from ifar.ca:

Stand Alone Remote Starter

A remote car starter installation can be completed using only the interface module. An after-market remote car starter is not required. For use on automatic vehicles only.

 

Second, the installation with and without t-harness are completely different.  Which is why the EVO-ALL guide and the EVO-ALL & THAR-GM1v2 guide are different.

 

• EVO-ALL & GM - Revision 20131104 covers the EVO-ALL install without the t-harness and for use with a remote starter.
• STANDALONE EVO-ALL & Flip Key - Revision 20130611 covers the EVO-ALL install without the t-harness in Stand Alone.
• EVO-ALL (Firmware 4.18 & Hardware 6 and more required) & THAR-GM1 v2 (T-Harness) - Revision 20130509 - this is the complete THARNESS install guide which includes both with and without a remote starter install.

 

The diode mentionned is an error in the guide and will get removed.