SYSTEM THEFT DETERANT ON AFTER STARTWITH REMOTE NO RESTART

Question

Wired remote start with evo all gmt4 as per install manual #25001, using titan elite  remote start .

changed to wired without data link and updated bypass fimware to 70.17 as per fortin support tech same result when ground while runing is removed the red light on bypass goes out can anyonme who has used this version to install in gmc's please share some info as i am running out of time on this one.

thanks in adavance

Answer 1

master reset the evo and start over. This will reset options back to default and you will have to run through the programming again. Don't enable B2... It's on right now.. http://fortin.ca/en/support/001a06447316/

 

After reprogramming, make sure the datalink protocols of both remote starter and bypass are set to the same thing. Worst case, don't use datalink.

 

To take take car out of lock out, just leave ign on for 10-15 mins. The antitheft will reset itself. Don't bother trying to program the evo again until the antitheft is reset and that the vehicle starts with the key. Make sure that RED connector on the EVO is connected at all times that you are trying to start the vehicle with the key.

 

You can find info on how to reset the evo-all here : http://wirecolor.com/en/qa/50193/faq-how-do-i-reset-my-evo-all