Can a Directed 9474T Universal remote kit be used with EVO-ALL

Question

I have an EVO-ALL installed currently in a 2005 Chrystler 300 using OEM 3X for remote start.  I have a DIrected 9474T remote kit and want to use that instead of the OEM remote.  Will it work and how would I connect it to the EVO-ALL. (and what programming changes for the EVO-ALL would have to be made.)

Answer 1

As long as that 9474T kit is comaptible with the DEI XL202 RF to Data interface, it will be compatible.

A setup guide for the options can be found here : EVO-ALL & XL202

Comments

I saw that but this is different.  This kit is a key fob with an associated antenna.  There is no module that the antenna wires connect to.  There are three wires coming out of the antenna - Green, Red, Black.

---

The DEI antenna kits need to go through the RF to data converter in order to work with any interface module.

 Antenna plugs into the rf-converter (xl202) which plugs into the interface module (evo-all i nthis case). The XL202 is normally sold separately but you need to first find out if 9474T is compatible with the XL202.

 (the evo-all pairs with the XL202, not the antennas)

---

Looks like I am out of luck on this one.  Will try another RF Kit.

---

Crimestopper RF-KITs come with all the necessary pieces.

• http://www.crimestopper.com/products/remote-start/revo-series.html
• Setup guide : EVO-ALL & Crimestopper REVO

 

Ultrastart AST Atom also has all the necessary parts.

• http://www.ultrastarters.com/product_pages/atom.htm
• Setup guide : EVO-AL & AST ATOM
• NOTE: just gotta be sure you would be getting only the RF-KIT