evo all smartstart not workung

Question

Setup for d2d, tried different possibilitys.

The DSM200 amber led solid, green led solid.

Was working with keyfob.

Firmware 70.16

Answer 1

Options do not look right : http://fortin.ca/en/support/001a06289845/

 

Do a master reset on the EVO, reprogram the module and follow the documents on how to setup 3x lock start and how to setup for use with a smartstart. You can find the documents for setup here : http://fortin.ca/en/technology/rf_kits.html   

• EVO-ALL OEM Remotes 3x lock setup
• EVO-ALL DEI SmartStart setup

 

Master reset procedure:

1. Hold down programming button while plugging in the datalink connector.
2. Let go of button when LED is RED.
3. Push and hold button again until all three LEDs start to alternate.
4. Disconnect unit, she is now reset.

 

Comments

The smartstart is still not working, reset everything, keyfob works fine DEI smartstart no luck.