tucson ix35 2014

Question

vehicle for the local market Russia . Tucson 2014 push-to-start. Connectors are the same, but the wires are arranged differently. I found can1 can2 and EMS COM. But I did not understand that is the "control" wire.

As a result, When starting the engine the steering wheel is unlocked . And if you want to start driving , you need to turn the engine off  and start again ( because the car does not allow to turn the ignition on otherwise).

 

I have a factory wiring . Tell me, what function assumes that wire , and I'll find it.

Answer 1

half the message of your question does not show up.

Answer 2

Weird bug with the message not showing up. Here's the complete message :

"vehicle for the local market Russia . Tucson 2014 push-to-start. Connectors are the same, but the wires are arranged differently. I found can1 can2 and EMS COM. But I did not understand that is the "control" wire. As a result, When starting the engine the steering wheel is unlocked . And if you want to start driving , you need to turn the engine off and start again ( because the car does not allow to turn the ignition on otherwise). I have a factory wiring . Tell me, what function assumes that wire , and I'll find it."

The "control wire" will test as a + ignition but cannot tell the location on a russian vehicle. You don't have the same connector in passenger kickpanel ?

Comments

merci, r

Answer 3

The CONTROL wire was to be used to allow key take over. Unfortunately it does not work on the 2014 Tucson and will be removed in the next udpate of the guide.

 

Meaning, take over will not be availble.

Comments

thanks for your support .

Answer 4

Hello. I have a bit same problems. My Hyundai ix35 2012  is made in Europe same push to start i buy compustar with evo all and we have problems with right drawings. Now is question for you isairon dop how you finnish your instalation? is work properly now? Please email me on anovoselic@gmail.com and i will be thankefull if you have more information for me. we cant find key sense wiring on drivers kick panel. on drawings where show to be is empty space and we miss drawing where connect main harness wires.Compustar team dont want help me with information  :( now we looking what we can do to finish this project.

Thanks a lot.

Comments

all connections required are in the EVO-ALL installation guide, The installation is slightly different than the 2014 model. This pdf includes the required remote starter connections and the evo-all connections.. EVO-ALL & Hyundai Tucson (2010-2013) - Push-to-Start - Revision 20141008

 

The keysense allows the vehicle to remote start on the first attempt. If this connection is not done, it will remote start only on the second attempt.

 

 

 

---

Thank you. I have right this pdf version 20141008. But we cant find that key sense connector. I have no idea where we can looking for. is not there where picture shows. I have question we need to cut 2 wires WITHOUT DATA-LINK: and connect to 12v and ground same time with connector (brain) or just one option? Here is picture we need to connect like is make with blue lines or just red or Green lines? this is litle confusing information for us.  we dont want to burn something ;)  thank you.

 

---

If you do not want to use datalink, cut one end, and put 12V on the RED and ground the BLACK wire. The blue and white wires do not connect anywhere.

If you want to use datalink, just connect the datalink in the compustar. No need to cut any wires this way.

 

The only information i have for the keysense is what's in the guide. Which shows the connector located at the fuse box inside the car.