2012 Suziki Kizashi(PTS) Remote engine start key can not use

Question

Today I testd the Vehicle of Kizashi 2012(PTS). Using the Guide from the Fortin Homepage,I can Remotely start the Engine. But because your guide simulate the key is the status of power off. After the engine is started remotely,the function of Door unlock and lock of the key is not used. If the customer want to get into the car,,you must be remotely turn off the engine. So your method about Kizashi can not be used. About Suziki Kizashi,do you have the other method that similar Chinese Nissan Teana. (EVO is used only bypass,STARTER will control to start the engine.)

Answer 1

Hello Jianli liu,

 

We have some questions...

1- Are you trying to use stand alone or is there a remote starter installed?

2- Is it the factory remote that does not lock or unlock when the car is started?

 

About Suziki Kizashi,do you have the other method that similar Chinese Nissan Teana. (EVO is used only bypass,STARTER will control to start the engine.)

Currently we can only do it by connecting the push start button and the brake. We have not tested any other method.

 

The way we do the transonder bypass with Rx and Tx would not allow the car to start if we do not do the connections of the brake and push to start button. To do connections similar to the Teana, we would need to completely redo engineering on the transponder bypass part.

 

This installation simulates someone starting the car. To start he car normally, you need to push on  the brake and the push to start button. The EVO-ALL does the same thing.