Omega RF Kit Install Question

Question

I'm about to install some Omega kits and came across this discussion from a few months ago:
https://fortin.ca/en/qa/122512/Omega-OL-RF-RF-Kit-not-working-with-EVO-ALL/

Earlier in that thread it was stated "...the blue connector on the Fortin AUD1 harness is only for Fortin RF-KITs."  But the current instructions on page 3 state to use the RF-A2A. Doesn't that provide the same functionality?
https://fortin.ca/download/107781/EVO-ALL_IG_EVO-ALL_RF-KIT_OMEGALINK_REVO_EN_A_107781.pdf

Unless the splices go to different wires under the tape for some reason, the wire scheme on the Omega adapter is the same as the RF-A2A.  The Omega antenna cable switches the blue and green wires on each end but I thought the Fortin also did that?

Answer 1

Thanks for pointing that out! There's no swapping being done in the RFA2A. Use the omega adaptor as they have comfirmed that as long as their adaptor is used and that the antenna has to the proper hardware updates, the omegalink kit would be functional with an evo-all .