Evo One LTE will not remote start, unlock and lock doors from phone.

Question

Hello, I recently installed the Evo One LTE USA. The oem remote works fine to remote start the vehicle but anything to do with the evo start module won't work. It shows the doors being unlocked and opened, battery voltage, and temperature. I configured the RF kit as the Evo Start 2 when flashing my Evo One, could that be the issue? I also could not find a wiring diagram anywhere on either of your websites which would probably help me. I could only find the wiring diagram for the canadian version with the antenna.

Vehicle is a 2015 Chevrolet Silverado 1500.

Using Gm7 T-harness.

Answer 1

The EVO-START-LTE will need to be paired to the evo-one.

1. Press unlock on the oem to disarm the evo-one.
2. Tuen ignition on -off-on
3. Press and release the brakes 4 times
4. There will be a red led flashing rapidly on the back of the evo-one near the yellow loop.
5. Turn ignition off. Done.

You can find evo-start-lte guides under Support -> Compatible Remote Controllers

Here is a direct link.
https://fortin.ca/download/102151/EVO-ONE_IG_EVO-START_QUICK-GUIDE_D_102151.pdf