2011 Toyota Camry remote starter engine cranks but won't start.

Question

Hi guys, my again over here, almost winter and ppl locking for install remote starter in they cars. I am trying to install an EVO ONE with a k411 RF module in a 2011 Toyota Camry but it does not send the start pulse. This has happened to me on two 2011 Toyota Camrys, exactly the same problem. It is not a type G key, it is a standard key. I am using the same guide: https://fortin.ca/download/81181/EVO-ONE_IG_REG_BI_TOY-CAMRY_KEY_2007-2011_A_81181.pdf I used the same installation wiring and the same programming on both cars, but the result was the same, the car does not receive the start pulse.

I have already seen that someone on the forum had a similar problem and they did not give a concrete solution: https://fortin.ca/qa2/121279/2009-toyota-camry-remote-starter-engine-cranks-but-wont -start

Here I share the video with the problem and the data of the car and the EVO ONE module to see if you can help me: https://drive.google.com/file/d/1RQyDUUYFEomx9kqWpx2LhHOuaz0FOUmN/view?usp=sharing

Module: EVO ONE S/N: 002B04339802

Car VIN: 4T1BF3EK6BU678116

Thank you very much for advance.

Answer 1

Hello,

Please enable option 2.4 and re test.

Best regards.

Comments

Derek, thanks you so much. Whoever, you are the best. Kind regards!