2015 Santa Fe no response with 3x lock

Question

Installed Evo One in 2015 Hyundai Santa Fe PTS. All connections have been checked. Module seems to program fine according to LEDs. Yellow LED lights with vehicle in run position. No LEDs illuminate when pressing the remote buttons, and the car does not respond in any way. Tried a second unit and same symptoms.

Answer 1

I just finished my install on my 2015 Santa Fe Limited push button. I had the same issue at 1st, but was able to get it working after I checked and redid my wiring. Also make sure your firmware is up to date and all settings are configured properly

Comments

I honestly am surprised that there isn't a T-harness to help make the wiring easier. You're probably going to see an uptick in people adding remote start after Hyundai sunset a ton of vehicles that had Bluelink (hyundai's app that had remote start) because they had a 2g/3g adapter which phone carriers sunset (retired)

Answer 2

Hello,

Please provide the S/N number listed on the back of the evo.

Also ensure options C1 is on in the bypass and option 38.2 is on in the starter.

Best regards.