Cx-5 without datakey failing remote starting

Question

Hello,

I have a mazda cx-5 2016 with automatic transmission push to start.

but unfortunately my car doesn't have a DATAKEY pin in the CAN .

I'm using evo-all with RF kit (EVO RM942).

As per my understanding with DATAKEY not available I'm only left with the setup "Regular installation-1key programming" GUIDE#63601

I have made all the connectivity as per the guide and configured the module as per the guide...but never got the module to start my car...I got it only to lock and unlock my car using the RF remote or original remote.

when I try to start my car the evo-all module just starts clicking multiple time but the car never starts.

below is a link of a video for the behavior of EVO-ALL when I attemp to remote start the car.

https://www.veed.io/view/5b07e914-1a3c-49d4-ab0c-5372c7b1c617?sharingWidget=true&panel=share

Any idea or suggestions please?

Thanks in avance.

Regards,

Answer 1

There is no stand alone installation using the 1 key programming method. It is a completely different installation and requires a thrid party remote starter in order to power up ignitions and starter wires. Diagram 63601 shows you that a separate remote starter unit is required. This is called a "regular installation" and not a "stand alone installation" (top of first page). 

 

Your other option is to take that out and change it for an EVO-ONE + THAR-ONE-MAZ3 t-harness.