Nissan Sentra remote start not working.

Question

I have a 2017 Nissan Sentra PTS. I've done the programming and decrypting processes twice now and pressing the button 3 times to start does not work.  The security and caution light on the dash are also on. The service number on the program module is 00A07336089. I just rechecked the ground and now the caution light has turned off, nut the security light is staying on.

Answer 1

You need to enable option D1 in the evo-all.

Comments

Thank you- D1 has been enabled.

Remote start still is not working and the caution and immobalizer lights are back on the dash.

---

Do the brake lights turn on when trying to remote start?

 

Does the dash turn on when trying to remote start?

 

Was purple/yellow on the 20 pin connected?

---

Brake lights and dash do not turn on when attempting to remote start. The four ways flash both on the outside of the car and the dash.  It's a quick flash- same sequence as locking the car.  I don't think a purple/yellow line is connected in the t-harness assembly.  There are two wires that plug into the car - a white and a black main line. The four smaller wires 1 black, 1 white, a red and I believe a smaller white line all connect to the black box that is used to program everything.  I did notice a smaller wire when looking closely at the t-harness lines but don't see a spot to connect it.

---

When you press lock does the blue led blink? If it does blink blue, what happens on the evo when you make it blink 3 times in a row?

Did you connect the start/stop button connection?

 

Purple/yellow should be connected to lt.blue/black as per the installation guide: https://fortin.ca/download/74261/evo-all_ig_tsa_bi_nis1-sentra_pts_2013-2018_a_74261.pdf