Questions & Answers

How to add RF-2WT10-SS to evo-gm3 with RFACompu

0 votes
How to add RF-2WT10-SS to evo-gm3 with RFACompu.

if this don't work what do ineed to make it work?

2014 GMC sierra with key..
posté Sept 25, 2017 dans la catégorie GMC par Martin Berube (280 points)

1 Réponse

0 votes
You do use the RFA compu you need the FT-D100. RFA COMPU is only used with evo-one NOT evo-all.

Also we have not tested this RF kit as it is not listed on our compatible RF kit section, is this a new series with the encoder built into the antenna.  (http://fortin.ca/en/technology/rf_kits.html)

If you did want to try it you would follow this guide: http://cdn.fortin.ca/download/20141/rf-2w1b-sp-install-guide-20141.pdf
répondu Sept 25, 2017 par derek g (347,180 points)
so i need the FT-D100 and not the RFA compu Right
ft-d100 is for evo-all

rfa compu is for evo-one

 

As previously mentioned this RF kit has not been tested with the evo and is not listed in the supported RF kit section. You can try it but I do not know if the buttom mapping is the same.
it made by arctic start
Ah I see it now yes. It is listed...FYI artic start and compustar are one and the same ;) still need an FT-D100 though.
I will order the FT-D100 and let you know how it works out..

 

Thank you Derek

yes sounds good 

HI

i got the FT-D100 and wihch wire do i plug from the eve-gm3 in to the FT-D100 in the sucket with plugs side byside with 2 pin and 4 pin or 4 pin and 6 pin

Thanks
...