Questions & Answers

Evo all stand alone remote starter

+1 vote
HELLO WHEN I PLUG IN MY EVO ALL CAR STARTS AUTOMATICALLY WITHOUT ME PUSHING MY KEY FOB 3 TIMES
posté Dec 4, 2013 dans la catégorie Dodge par david ponce2 (140 points)

1 Réponse

0 votes

Hi David,

What is the 12 digit service number written on the back of the EVO?

What vehicle?


Make sure nothing is connected to the yellow/black wire of the EVO.

répondu Dec 4, 2013 par Robert T (301,890 points)
001A06 205823

2012 DODGE AVENGER SE V6

If I look at the EVO-ALL options, which you can find here, the stand alone option for 3x times Lock start is not turned on.


And just in case, you should be following connection C of this install guide if also using a Tharness. EVO-ALL & THAR-CHR5 (T-Harness) - Revision 20130219

  • Make sure the connections form the T-harness to the EVO are also probably done. I have seen an eBay seller pre wire these for their clients but still managed to make mistakes with the 2 wires that would need to be connected.
Hello again! So how many wires are being connected as a stand alone remote starter?

If you have a T-Harness...

  • 2 connections are required
  1. Green/Red of the 20-Pin white connector to the Purple of the T-Harness
  2. Yellow of the 20-Pin white connector to the Yellow coming from T-Harness

Your initial problem though comes from the fact that you  currently do not have the Stand Alone Option activated in the EVO.

...