EVO ALL Unlock/Lock Output

Question

How do I get the EVO ALL to have lock/unlock outputs like on this guide https://cdn02.fortin.ca/download/75151/evo-all_ig_tsa_bi_nis1-m35-m37-m56-q70_pts_a_75151.pdf

I am trying to do this on a 2008 Chevy Silverado without factory lock/unlock and the 642W rf Kit 

Answer 1

Have you checked the green and white to see if they output when pressing lock or unlock on the rf kit?

Comments

The green and whites are shown as Door and Trunk Status per guides 75151 and 107511. Are you saying that the green and white wires change from Door and Trunk Status to lock and unlock when the RF kit receives a lock/unlock command, then reverts back to Door and Trunk Status? I ask because I'm looking for a method to get the lock/unlock status and seeing if the EVO-ALL will fit the bill on a 2008 GMC Sierra/Chevy Silverado.

Thanks for any insight!

---

When the module is setup as a STAND ALONE REMOTE STARTER (option D1 ON), the green and white convert to lock-unlock outputs unless specified otherwise in the Stand Alone Installation guide for the vehicle.

 

Guide 107511 is a regular installation for when the unit is used as normal bypass module. The outputs in this case are set to door/trunk status. 

 

Guide 75151 is a proper stand alone guide for some Nissan vehicles. The wires are tagged as lock/unlock

 

 

 

---

Thank you! This is perfect. :)