PTS button connect for Evo-All on nissan murano

Question

I have Evo-All installed and programed correctly but the remote does not work.

i checked the PST button brown wire have 12v without press and 0v with pressed the button. And when tripple click the OEM remote the module send 6v signal only.

Please help, my car is Nissan Murano 2011 installed with Evo_All with T-Hardness Nist1

Answer 1

What is the service number to the module?

What do you mean when you say "sends 6 v signal"? This wire is a negative output it should not be sending voltage...unless the module was damaged during installation.

Comments

It works now, but the autolight not turn off when 3 times clicked OEM remote. Found some posts say have to connect the wire to door pin. Could you please guide me at this point.

Where is the door pin located?

What wire from module and connect to where at door pin?

 

Thanks

---

this connection is in the installation guide for the evo on page 4.

Pink/Black wire from the evo all 20 pin connector to the lt.blue at the bcm in the vehicle. Test with multimeter before connecting.