Showing up an error code

Question

An error code, "U0415", is showing up on the dash board after installing Evo-All. Please find a solution for deleting the error code. Thank you.

Vehicle: 2015 Chrysler 300 SRT

Answer 1

Is a t-harness being used?

A couple of things to try

 

1. Put the evo-all in standalone and test it by remote starting by 3xlock, if no codes are triggered this way, it maybe a timing issue with the remote starter, what remote starter is being used?

 

2.Turn OFF option D1(standalone, connect back to remotestarter. If you have access to a Flashlink Updater-2, turn off A7 (footbrake) in the options tab, sit in the vehicle and initiate remote start and when ignition turns on press on brake, and tell me if the code appears when starting like this,

 

Also post the vehicle's vin here please so we can check the vehicle's information.

If starting by pressing the brake pedal does not trigger the code.

Please do a master reset and re-flash and reprogram on 74.18 or lower. If dropping the firmware as stated before fixes this issue, please post your vehicle's vin and the evo's 12 digit service number so that we can open a bug report.

Thank you

Answer 2

Are you using a separate remote starter or the EVO on it's own in stand alone mode?

 

First, that error comes out when the brake switch sees improper voltages. The installation does not require any connections to the brake switch so if you have anything connected there, remove it. After verfying this, try the following.

 

• Reflash the EVO to firmware 0.81,
• Master reset the EVO. http://wirecolor.com/en/qa/50193/faq-how-do-i-reset-my-evo-all?show=50193#q50193
• Reprogram the EVO.

 

Before doing all this, most error codes on Chrysler can be erased by disconnecting the battery a few minutes (5-10) or with Diagnostic tool. 

 

If the code still persists, you have an error in the installation. Follow the appropriate Stand Alone or Regular installation guide, Double check and TEST every connection. You should have nothing connected on the brake switch.