how to re-learn rf kit compustar g9?

Question

I reset the evo-all and now the compustar g9 rf kit I had program to it won't work anymore I tried to reprogram it to the evo all but it won't do anything, any suggestions? thanks

Answer 1

You will need to plug the evo-all into the flash link updater and re enable the option H6 - FT-D100

Comments

Yeah I did re-flash the evo all and I did enabled the H6 option, it still wont relearn the remotes

---

Here is a link to the installation and programming procedure, as long as this is followed correctly their is no reason for the remotes to not program.

http://fortin.ca/download/20141/EVO-ALL%20RF-KIT%20FirsTech%20FT-D100.pdf

Why was the evo-all reset in the first place if the remotes were functioning?

---

ok to answer your question an my own question, I did the reset because the ground out starter killler would not come on, alarm work fine, so thats why I did the reset, now when I did it I did not disconnect the ftd100 adapter and it appears the reset did some damage to the adapter I don't know if the damage was to the software part or hardware part but I can confirm that the ftd100 is no longer working because I replace it and I was able to re-program the compustar g9 rf kit again.