evo all wont start

Question

Hi i was installed Evo all to my 2015 toyota Avalon push start and it was work great every time so design to add mobile link lt2 now not things work tthe link-lt2 was removed, now eveytime start parking light turn on but nothing turn on in ignition, the system installed with the T-harnes, Green led light flash when hit lock button

Answer 1

What is the S/N number on the back of the evo?

 

Have you tried to re program the evo to the vehicle?

https://fortin.ca/download/86601/evo-all_ig_tsa_bi_toy6-avalon_2012-2015_pts_a_86601.pdf

Comments

Hi the S/N is 001A07 210504 , also i already master reset and reflashed  the module  still no ignition and no crank ( the Evo green flash everytime hit lock also when press 3X to start the red led light stay on for afew second then turn of and tune on again ) Thanks.

---

Please turn off the following options and re test

 

- A11

- A13

- A14

- B1

- D5

---

hi Derek, i did try your suggest still no ignition , Thank Sn: 001A07 210504

---

Please try the following:

 

- disconnect the evo-all.

 

close all doors, hood, trunk.

 

press lock on the OEM remote 3 times but on the 3rd lock press, hold the button down for 3-5 seconds.

---

Followed the above not things happened, what is the best firmware for 2015 Avalon.

Thanks

---

Next I would suggest doing a master reset: https://cdn.fortin.ca/en/download/61931/61931.pdf

 

- Re enable any options required for 3x lock.

 

- Flash firmware 79.56 into the evo

 

- Re program the module in the vehicle and re test 3x lock